PEEK MATERIALS
SustaPEEK MOD ESD 90 ANTISTATIC HIGH
PERFORMANCE PLASTIC Sheet & Rod
SustaPEEK MOD ESD 90
Semi-crystalline thermoplastic
Special properties
PERFORMANCE PLASTIC Sheet & Rod
SustaPEEK MOD ESD 90
Semi-crystalline thermoplastic
Special properties
•Excellent sliding and abrasion behaviour
• High rigidity
• Good dimensional stability
• hardly inflammable
• Self-extinguishing
• Very low smoke density
• very high resistance to high-energy radiation
• Very good sliding properties
• High abrasion resistance
• High wear resistance
• optimised balance of stiffness, tensile strength
and impact strength
• Antistatic
• high dimensional stability under heat
• High continuous service temperature
• Low coefficient of thermal expansion
Typical areas of application
material, and is characterised mainly by its very good mechanical properties and
exceptional dimensional stability, even at high continuous operating temperatures of
up to 250°C. Due to their properties, PEEK plastics are suitable for a wide range of
applications with demanding operating conditions
Your Advantages
Previously, thicker sheets had to be milled or machined down to obtain thinner sheets
– a time-consuming process. Our new thicknesses eliminate the need for these cutting
operations. It means you save time and material and reduce the manufacturing costs
of your products.
Areas of application Electrical industry Semiconductor industry Aviation and aerospace
industry Medical technology Food processing industry
EtroX® V PEEK HIGH PERFORMANCE PLASTIC
High-precision: EtroX® V is particularly suitable for machining high-precision test sockets
with extremely small boreholes. These have a minimum diameter of up to 0.1 mm and
are very well formed with only minimal burr formation
High precision: EtroX® V is particularly suitable for machining high-precision test sockets with extremely small boreholes.
These have a minimum diameter of up to 0.1 mm and are very well formed with only minimal burr formation.
The risk of individual, defective boreholes and thus defective components is reduced. Even a single faulty borehole would
lead to a complete defect in the machined part. These errors are usually only noticed during the final inspection by manual
or optical tests.
Precise positioning: The softer a material is, the higher the likelihood that the positioning of individual holes will deviate.
Optical position tests carried out by customers on test sockets made of EtroX® V have demonstrated especially precise
positioning of boreholes. This underscores the low stress level and excellent machinability of the new premium material.
Properties of EtroX® V
Typical areas of application
•Mechanical engineering
• Materials handling industry
• Electrical industry
• Teletronics
• Medical engineering
• Aerospace industry
• Chemical engineering and tank building
SustaPEEK Natural Mod
HIGH PERFORMANCE PLASTIC Sheet & Rod
PEEK (Polyetheretherketone) is a semi-crystalline, thermoplastic high-performance SustaPEEK Natural Mod
HIGH PERFORMANCE PLASTIC Sheet & Rod
material, and is characterised mainly by its very good mechanical properties and
exceptional dimensional stability, even at high continuous operating temperatures of
up to 250°C. Due to their properties, PEEK plastics are suitable for a wide range of
applications with demanding operating conditions
Your Advantages
Previously, thicker sheets had to be milled or machined down to obtain thinner sheets
– a time-consuming process. Our new thicknesses eliminate the need for these cutting
operations. It means you save time and material and reduce the manufacturing costs
of your products.
Areas of application Electrical industry Semiconductor industry Aviation and aerospace
industry Medical technology Food processing industry
EtroX® V PEEK HIGH PERFORMANCE PLASTIC
High-precision: EtroX® V is particularly suitable for machining high-precision test sockets
with extremely small boreholes. These have a minimum diameter of up to 0.1 mm and
are very well formed with only minimal burr formation
High precision: EtroX® V is particularly suitable for machining high-precision test sockets with extremely small boreholes.
These have a minimum diameter of up to 0.1 mm and are very well formed with only minimal burr formation.
The risk of individual, defective boreholes and thus defective components is reduced. Even a single faulty borehole would
lead to a complete defect in the machined part. These errors are usually only noticed during the final inspection by manual
or optical tests.
Precise positioning: The softer a material is, the higher the likelihood that the positioning of individual holes will deviate.
Optical position tests carried out by customers on test sockets made of EtroX® V have demonstrated especially precise
positioning of boreholes. This underscores the low stress level and excellent machinability of the new premium material.
Properties of EtroX® V
•Very high tensile modulus of elasticity
•Very high ball indentation hardness
•Very low water absorption
•Very low residual stress
•Very high dimensional stability even at high continuous
operating temperatures of up to 250 °C
•Excellent machinability
For more information please contact us now.
For more information please contact us now.
Jun 12,2023